Scalloped

Ideal for cutting Fibre, Rubber and Foam.
The scalloped edge leaves a safety edge on the die cut board.
 

Rotary Perforating Rule

Used to hold die cut blanks together & for producing tear strips.
Available in both straight & serrated teeth.

Rotary Cut Crease Rule

Designed to enhance folding of corrugated board. Cut & Gap is produced to exact dimensions including height control of crease.

Rotary Creasing Rule

Produce to the same high specifications as standard creasing rule. Height control is important to produce a defined crease that folds dimensionally well.

 

Manufacturer E+S
Thickness 3, 4, 6pt
Heights 23.8 - 50.0mm
Bevel CB
Availability metre lengths
Hardness 36 HRC355 HV
Tooth Pitch 8TPI - 12TPI
Applications Fibre, Rubber & Foam.

Manufacturer E & S
Thickness 3, 4pt
Heights 23.824.625.4 26.0mm
Bevel CB, LCB
Availability metre lengths, coils
Hardness 36 HRC355 HV
Tooth Pitch All standard sizes.
Applications Corrugated, Solid fibre

Manufacturer E & S
Thickness 3, 4pt
Heights23.824.625.4  26.0mm
Bevel SB, CB
Availability metre lengths, coils
Hardness 36 HRC355 HV
Tooth Pitch 8TPI12TPI
Applications Foam, Corrugated, Solid fibre.

Manufacturer E & S
Thickness 3, 4pt
Heights2 0.0 -40.0mm
Bevel Plain
Availability metre lengths
Hardness 36 HRC 355 HV
Applications Corrugated, Solid fibre.

Bevel Profile
Flexible Cutting Rules
Standard Cutting Rules
PEMA Crease, Profile crease & Laser crease
Perforating Rule & Cut crease
Label Rule
Waved Edge Rule & Zipper Rule
Speciality Rule
ES Profile & Special Blades
Rotary Rule

Download PDF catalogue
Requires Adobe Acrobat Reader