Multicut

A serrated scalloped rule for cutting tough materials. The profile produces a safety edge on finished blanks.
Exceptionally sharp with great edge hardness & unique self clearing action. Required cutting pressure is substantially reduced due to the tightest height tolerances.

Rota-Top

General purpose 8tpi & 12tpi rotary rule.
Can be used on a wide range of materials.
Maintains sharpness & dura-bility due to smooth shaved edge.

Rota Top
TOPDURFLEX

General purpose 8tpi & 12tpi rotary rule.
Same as ROTA-TOP but with high frequency inductioned hardened edge for greater durability & performance.
 

Kleancut

Can be used equally for corrugated and fibre based products as well as plastics.
KLEANCUT Profile teeth helps reduce crush on the board and produces a smooth edge on board if desired.

Manufacturer E+S, GNU
Thickness3 , 4pt
Heights 23.824.625.426.0
Bevel CBSB
Availability metre lengths, coils
Hardness 36 HRC355 HV
Wave Pitch 3.5mm5.0mm
Applications Corrugated, Solid fibre & Nylon.

Manufacturer E+S, GNU
Thickness 3, 4pt
Heights 23.824.625.426.0
Bevel CBSB
Availability metre lengths, coils
Hardness 36 HRC355 HV
Tooth Pitch 8TPI - 12TPI
Applications Foam, Corrugated,
Solid fibre.

Manufacturer E+S, GNU
Thickness 3, 4pt
Heights 23.8 - 80.0mm
Bevel CBSB
Availability metre lengths
Hardness 35 HRC355 HV
Tooth Pitch8TPI - 12TPI
Applications Foam, Corrugated,
Solid fibre.

Manufacturer E+S, GNU
Thickness 3pt (1.05mm)
4pt (1.5mm)
Heights 30.040.050.060.0
Bevel CBSB
Availability metre lengths
Hardness 35 HRC345 HV
Tooth Pitch 8TPI - 12TPI
Applications Corrugated board, Fibre & plastics.

Next Page

Bevel Profile
Flexible Cutting Rules
Standard Cutting Rules
PEMA Crease, Profile crease & Laser crease
Perforating Rule & Cut crease
Label Rule
Waved Edge Rule & Zipper Rule
Speciality Rule
ES Profile & Special Blades
Rotary Rule

Download PDF catalogue
Requires Adobe Acrobat Reader