Centre Bevel

Cutting profile gives an extremely long life, ideal for cutting carton & corrugated board.
Supplied with or without springs.

Inside Bevel

Cutting profile gives an accurate vertical cut in the material with minimum distortion.
Supplied with or without springs

Back Clearing

Incorporates a step relieved back clearance to ease material through the base of the punch without obstruction.

Bowl Punch

Solid shallow profile leaves material cut within the sheet
Suitable for carton & corrugated board.

Side Ejection

Self clearing punch allows the waste to pass cleanly through the side of the punch. The die board must be relieved to allow the waste material to clear the punch.

Centre & Inside Bevel

Pre fitted with ejection rubber.
Durable profile material helps keep punch free of cut material.

Euro Punch (Hanging Slot)

Single style half radius within slot & radius ends for use in blister cards.
Manufactured from a solid base with or without springs.

Island Punch (Hanging Slot)

Double style half radius within slot & radius ends for use in blister cards. Manufactured from a solid base with or without springs.

Sizes2.0 - 30.0 mm with increments of 1.0mm
 Other sizes available on request

Sizes3.0 - 30.0 mm with increments of 1.0mm
 Other sizes available on request

Sizes2.0 - 30.0 mm with increments of 1.0mm
Other sizes available on request

Sizes2.0 - 12.0 mm with increments of 1.0mm
 Other sizes available on request

Sizes2.0 - 11.0 mm with increments of 1.0mm
 Other sizes available on request

Sizes3.0 - 30.0 mm with increments of 1.0mm
 Other sizes available on request

Sizes30 x 10 x 6mm
 Other sizes available on request

Sizes30 x 10 x 6mm
 Other sizes available on request

Punches
Ejection Rubber
Forme Components
Stripping Pins, Alu U Profile &
Cuir Components
Sundries
Perforating Type & Jigsaw Blades
Hammers
Die Board

Download PDF catalogue
Requires Adobe Acrobat Reader