Cutting Bevel Profiles
Centre Bevel
The most commonly used profile for standard board conversion and general purpose cutting applications.
Side Bevel
A useful profile for cutting rigid materials and closed shapes. The minimum counter bevel leaves a "square" cut edge on the converted material.
Long Centre Bevel
Useful for the conversion of thick or hard materials. This bevel reduces the amount of material defor-mation during conversion, also reduces the cutting force required.
Long Side Bevel
This profile offers similar advantages to Long Centre Bevel when converting thick materials. The additional advantage is the material being converted is left with a "square" cut edge.
Die Rule Packaging Information
All PEMA Die Rule is supplied in robust B flute corrugated packaging. This provides a secure medium for handling, storing and transit of rules.
The coil box contains steel rule wound in either clockwise direction (CW) or anti-clockwise direction (ACW).
Each coil is securely held by 3 plastic ties which can be easily cut after placement in rule dispenser. The metre box incorporates a hinge flap which can be closed to keep storage and identification trouble free.
| Std Length Quantity | Std Coil Quantity | |||
| 2pt 10.0 - 23.80 | 100m | 2pt 10.0 | - 23.80 | 100m |
| 3pt 10.0 - 23.80 | 75m | 3pt 10.0 | - 23.80 | 50m |
| 4pt 10.0 - 23.80 | 25m | 4pt 10.0 | - 23.80 | 25m |