This is a demo store. Any orders placed through this store will not be honored or fulfilled.

RotaMate

51_52cr

RotaMate

Automatic Laser Dieboard Cutting System with Rofin Sinar Slab Laser

For cutting wooden rotary shells up to 3.000 mm length

Clamping device "Quickset" with maximum 7 clamping positions

Clamp positions are standard from left to right 0,600,1032,1682,2082,2482,2964 mm

Clamp position can be adjusted to customers specification prior to delivery

Diameter adjustable from 174 - 696 mm infinitely

VECTOVISION CNC

NT- Network

Rotary 3.000mm Length

Sturdy and rigid machine frame.

Nozzle protection system Crash ProTec

Unit will stop the system instantly when any possible collision occurs.

No reflection on backside of dieboard

Easy loading and unloading die

Restart of the system after failure (e.g. power) is done from the position the machine was stopped in.

Air- and water-cooled optics (lens and mirrors) - Guarantee for high cutting quality.

User-friendly VectoVision® CNC controller (if requested in local language) - 100% network-compatible.

80 % of the VectoVision® CNC hardware components are standard computer parts.

Database of materials, tools and diameters of the VectoVision® CNC could be configured by the customer.

Pulsing rate of the laser corresponding to the cutting speed.

Control of 3 pt and 4 pt automatically done by the VectoVision® CNC.

8 quadrant cutting slot control by VectoVision®

Automatic optimisations of the cutting sequences with Software Systems MultiJob + ContourEditor.

Rofin Sinar Laser source is a closed system, no possible contamination - less maintenance & service costs.

Rofin Sinar Laser source uses one gas bottle (approx. 900,- EUR) for almost 2-3 years use.

Online diagnosis via Internet (much cheaper than telephone).

Easily accessible components reduce the costs of service and repair.

Fume Cover

Pneumatically operated fume cover around the cylinder for internal and surface fume extraction

Rofin Sinar slab laser source up to 2500 watt

LASERMATE combo

automatic Laser Dieboard Cutting System with Rofin Sinar Slab Laser


Pre-make-ready

Pneumatical clamping device with

"Quickset" for preparation rotary shells for rotary shells 3000mm


Fixing

The shell is screwed onto the flanges to achieve the utmost mould stability.